Anti-Glare Film

Anti-Glare Film

$59.00$665.00

Anti-glare film applies to the outside of your glass or display, and works perfectly with our rear projection film. Our anti glare films do require an application fluid during installation, using our application kit or a professional installer is highly recommended for best results. For a complete list of exact sizes, view the “Size Chart” tab below.

*Note: All films are cut with a 1/16th” margin of error.

Have a Question About This?

*Except in the case of manufacturer defect, all film sales are non-returnable.

Sizes are shown as the diagonal size. Please see the “Size Chart” tab for specific sizing information.

Clear
SKU: AGF Category:

Description

What is Anti-Glare Film?

Anti-glare film is a thin film that is placed to the outside or viewing side of the glass or acrylic that your rear projection film or display is behind. It reduces glare and reflection from the front side (viewing side) surface of your display, increasing brightness, widening viewing angles and giving your viewing audience a brighter and more even viewing experience.

Anti Glare Film can be used with our rear projection films, LCD, Plasma, LED screens art displays, retail windows and more. When using LCD, LED, or Plasma displays, For best results we always recommend having the display as close as to the to the anti glare film, .5″ or closer is recommended. If you require farther than .5″ between your display and the window or glass please see our Ultra Clear Anti Glare Film

Anti-glare film is applied much like our rear projection films. (we recommend using our application kit for installs) During the installation process, removing the release layer from the back of the film exposes the built-in hi-tac adhesives that are applied in a wet application and will keep your anti glare film in place and removing glare on your displays, glass or acrylic surface for years to come.

*Note:  This product is not recommended for use with displays in high ambient light with a display brightness of less than 500 nits. The display may not be bright enough to have viewable images regardless of anti glare film being used in this setup. we recommend our ultra clear anti glare film *nits is the brightness level of a displays, the average consumer displays is 350 nits or less

Light Transmittance± 92%
Haze± 4.5 – 7%
Thickness0.075mm
Anti Glare Standard Roll Size49 in. x 33 ft.*

Download Anti Glare Film Spec Sheet:

Anti-Glare Film PDF Download Button

*Custom cut sizes are available. Call 1-888-631-5880 for details.

Size Chart

Our film is listed by its diagonal size according to a 16:9 aspect ratio. For specific measurements, please view the information below or contact a representative.

35″ = 17 x 31″42″ = 21 x 37″46″ = 23 x 40″50″ = 25 x 44″60″ = 29 x 52″65″ = 32 x 57″
67″ = 33 x 58″80″ = 39 x 70″84″ = 41 x 73″92″ = 45 x 80″100″ = 49 x 87″

You may also like…

Call Us